The cartoning machine automatically forms and closes boxes using
pre-glued cartons. It essentially consists of a carton magazine, a
box conveyor equipped with a folding system and a device for
opening and closing the flaps. Product insertion in the cartons is
carried out by hand. Most components of the machine are adjustable
so that format changes are particularly easy to carry out.
DESCRIPTION
1. Mechanical and pneumatic operation
2. Painted steel construction
3. Adjustable bucket conveyor
4. Carton magazine equipped with compacting device
5. Alarm for detection of low level of cases in the magazine
6. Alarm for boxes not open
7. Box pick-up through sucker arm with Venturi system
8. Mobile device for flap opening to ease product introduction
9. Hot-melt glue closing
10 .Handwheel and reference ruler for format change
11. All parts in contact with the product are made of AISI 304
stainless steel
12. Safety guards (electrowelded wire mesh) on all parts complying
with CE normative
13. Machine with CE marking
detail
Main Features
1.Low level easy feed carton magazine to make it easy to top up the
flat carton magazine without the need for steps or reaching.
2.Manufactured from mainly stainless steel and aluminium with top
quality components throughout.
3.Simple and easy to understand machine controls.
4.Easy to adjust for a range of different carton sizes with no
change parts required.
5.Safe to operate and quiet in operation.
6.Nordson glue applicator fitted as standard to give clean,
reliable and economical glue application.
7.Warning beacon will flash to warn the operators once the machine
carton magazine begins to run low.
8.Variable speed in operation with digital speed readout.
9.Ergonomically designed to give maximum operator comfort during
operation.
10.The Semi Cartoner can run almost any end load carton style. It
will operate with a range of sizes from small single confectionery
products through to large bulk and multipack cartons.
Application
Main Technical Data:
| Model | ZH-50 |
| Packing speed | 30-60 Cartons/min |
| Carton size range | L(40-100)mm×W(12-60)mm×H(12-60)mm |
| Carton gram requirements | 250-350g/m3 |
| Motor power | 1.5KW |
| Power supply | Three phase 380V 50Hz |
| Machine noise | ≤80dB |
| Air pressure | 0.5-0.8 Mpa |
| Air consumption | 150L/min |
| Dimension | 1100×1500×1900 mm |
| Weight | 250Kg |
